The main characteristics of electric translation table can be shown from three main parameters:
Accuracy: Different professions have different requirements for the accuracy of electric slides, so there is no specific regulation for the accuracy of electric slides. The accuracy can be graded according to large machine tools and small and medium-sized machine tools. Large machine tools generally have an accuracy of 1 meter and 1 wire. The accuracy requirements of small and medium-sized machine tools are generally higher than 0.1mm.
Speed: The speed of the electric slide is generally less than the theoretical value during use, because its speed is mainly affected by the load on the electric slide. At the same time, if only the speed is increased during the production process, the accuracy will also be affected and reduced.
Load: Load is one of the main factors that affect the accuracy and speed of the electric slide. Stroke: The useful stroke refers to the useful path length that the slider on the electric slide can slide. The longer the electric slide, the greater the negative impact of the load.
